Vacon NX User Manual

5
vacon • 62 Installation
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
For all other chasses (CH3, CH4), the standard delivery includes fast connectors of type 'Tema',
series 1300 or 1900. The fast connectors are available as option also for CH5, CH6, CH7.
Table 21. Liquid connector types (all pressure values at nominal flow)
Chassis
Thread on
element
(internal)
BSPP
*.)
*. ) Use sealing (e.g. Usit-R Metal washer-rubber sealing) for this type of connection according to
ISO standard 228-1
Connector type or
hose type
Thread
(cust.)
BSPP
**.)
**. ) Use sealant or sealing tape for this type of connection
Max.
pressure
(entire
system)
Pressure
loss,
(fast
connector +
element)
Pressure
loss,
(hoses +
element)
CH3 G3/8" 1300NE2 1/4"
6 bar 0.25 bar
CH4 G3/8" 1300NE2 1/4" 6 bar 0.25 bar
CH5 G3/4" Technobel 16*23.5 G1/2" 6 bar 0.2 bar
CH6 G3/4" Technobel 16*23.5 G1/2" 6 bar
See table
below
See table
below
CH7 G3/4" Technobel 16*23.5 G1/2" 6 bar
See table
below
See table
below

Vacon NX Specifications

General

Product Type	AC Drive
Control Method	Scalar Control
Enclosure	IP00, IP21
Communication	Ethernet
Safety	STO (Safe Torque Off)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Ambient Temperature Range	-10°C to +50°C (with derating above +40°C)
Cooling Method	Air-cooled, Liquid-cooled