EasyManua.ls Logo

Vaisala FD12P - Technical Specifications

Vaisala FD12P
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User's Guide _______________________________________________________________________
24
______________________________________________________ M210296en-A
Specifications
Mechanical Specifications
- Dimensions: 2.3 m × 1.6 m × 0.6 m (H × W × D)
- Weight: 35 kg, excluding the installation plate for the pole
mast
- Mounting: on a concrete foundation with three 16-mm
bolts
- Material: anodized aluminum, natural gray
Electrical Specifications
- Mains supply: 115/230 VAC ± 20 %, 45 ... 65 Hz
- Maximum power consumption: 35 W + 100 W defrosting
heaters (in cold weather)
The sensor electronics:
- Lock-in amplifier
- LED power stabilizer
- Contamination monitor
- Lens heater
The control unit:
- Intel 8031 microprocessor
- Program memory, 64 Kbytes
- Read/write memory, 32 Kbytes
Outputs:
- Serial data line may be used either as RS-232 level signals or
interfaced via an optional data modem
- RS-485 (2-wire)
- 4 - 20 mA analog current (sink) output

Table of Contents

Related product manuals