Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 29
CHAPTER 3
INSTALLATION
This chapter provides you with information to help you install this
product.
NOTE
Before installation, read section Product Related Safety Precautions
on page 13.
Organizing Installation
Before you begin to install the FD12P Weather Sensor, make a plan of
the installation steps. The following is an example of how to organize
the installation process.
1. Surveying the site:
- Find the most representative measurement site.
- Determine orientation of the Weather Sensor.
2. Cabling plan is required for the following:
- Grounding cabling layout and cable type.
- Power supply cabling layout and cable type.
- Modem/signal cabling layout and cable type.
3. Ordering the construction materials and cables.
4. Digging for cables and foundation.
5. Casting the concrete:
- Prepare concrete blocks by using a casting mold.
- Cast the fixing bolts in their places at the same time.
To Next Page
Loading...
Need help?
General
