Vaisala FD12P User Manual

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 65
An example with frames is as follows:
FD 100 6839 52 0.3
!FD 1"00 6839 52 0.3#-*
0123456789012345678901234567
Message 2
Message 2 is intended as the standard present weather message used
in data loggers or display units and it is set as default at the factory.
00 6839 7505 L 52 61 61 0.33 12.16 0
-----cumulative snow
sum,0...999mm
------- cumulative water
sum,0...999mm
------- precipitation (volume)
intensity,mm/h
--- one hour present weather code, 0...99
--- 15 minute present weather code, 0...99
--- instant present weather code, 0 ... 99
---- instant present weather, NWS codes
------ visibility ten minute average, max 50000m
------ visibility one minute average, max 50000m
- 1=hardware error, 2= hardware warning
- 1= visibility alarm 1, 2= visibility alarm 2
An example with frames is as follows:
FD 100 6839 7505 L 52 61 61 0.33 12.16 0
!FD 1"00 6839 7505 L 52 61 61 0.33 12.16 0#-*
01234567890123456789012345678901234567890123456789012345
Message 3
Message 3 is the same as the status message obtained by using the
STA command. Refer to Table 22 on page 86 for possible error texts.
FD12P STATUS
SIGNAL 0.39 OFFSET 126.83 DRIFT 0.14
REC. BACKSCATTER 1281 CHANGE -1
TR. BACKSCATTER 10.3 CHANGE 0.1
TE 2.7 VBB 19.4 VH 0.6
LEDI 5.6
P15 15.1 M15 -15.0 BGND -0.1
AMBL 0.1 DUTY 1.6
DRI21 MEASUREMENTS
TS 1.8 DRD INST 811 DRY 915.6
HARDWARE :
OK

Vaisala FD12P Specifications

General

Brand	Vaisala
Model	FD12P
Category	Accessories
Language	English