EasyManua.ls Logo

Vaisala FD12P - Optical Specifications

Vaisala FD12P
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 ___________________________________________________________Product Overview
VAISALA ________________________________________________________________________ 25
The output data:
- Automatic or polled data message
- Visibility, present weather, precipitation and status data
- Automatic message type and interval is selectable at 15
seconds to n × 15 seconds (n < 18) intervals
The analog visibility output:
- Selectable range and mode (linear or logarithmic)
- Status control bit for remote alarm relay, etc.
- Alarms and warnings (hardware failures, visibility limits)
Optical Specifications
Operating principle:
- Forward scatter at an angle of 33
o
and capacitive rain sensor.
The light transmitter:
- Light source: near-infrared LED
- Peak wavelength: 875 nm
- Modulation frequency: 2.3 kHz
- Transmitter lens diameter: 71 mm
- Reference photodiode: for light source control
- Backscatter photodiode: for contamination and blockage
measurement
The light receiver:
- Photodiode: PIN 6 DI
- Spectral response: max. responsivity at 850 nm, 0.55 A/W
(in range 550 ... 1050 nm over 0.3 A/W)
- Reception lens diameter: 71 mm
- Backscatter light source: near-infrared LED for
contamination and blockage measurement

Table of Contents

Related product manuals