16.2 Options
1. Scroll to OPTIONS and press SELECT.
2. Scroll to the desired programming option:
The programming options displayed in the OPTIONS menu vary depending on the security grade of
the system (see right column).
WARNING: To change the region on your panel, it is strongly recommended that you default your
panel and select a new region as part of the start up wizard.
Variable Description Default
SECURITY
GRADE
Determines the Security Grade of the SPC Installation.
l Irish and European Regions:
–EN50131 Grade 2
–EN50131 Grade 3
–Unrestricted
l UK Region:
–PD6662 (EN50131 Grade 2 based)
–PD6662 (EN50131 Grade 3 based)
–Unrestricted
l Swedish Region:
–SSF1014:3 Larmclass 1
–SSF1014:3 Larmclass 2
–Unrestricted
l Belgium Region:
–TO-14 (EN50131 Grade 2 based)
–TO-14 (EN50131 Grade 3 based)
–Unrestricted
l Switzerland Region:
–SWISSI Cat 1
–SWISSI Cat 2
–Unrestricted
l Spanish Region
–EN50131 Grade 2
–EN50131 Grade 3
l German Region
–VdS Class A
–VdS Class C
–Unrestricted
l France
–NFtyp2
–NFtyp3
–Unrestricted
Grade: 2
Country:
n/a
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the keypad
© Vanderbilt 2018 113 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
