Vanderbilt SPCA210.100 User Manual

3. The logging of individual zone state changes is enabled by setting the log attribute for that zone in
the Zone Attributes configuration page.
In order to avoid multiple events from the same source filling the log, the SPC system, in accordance
with standards, permits the logging of only 3 activations of the same zone in one set period.
17.7.2 Access Log
The log provides all the access events of the SPC system.
1. Select Log > Access log.
The following page will be displayed:
2. Create a text file of the log by clicking on the Text File button.
17.7.3 ALARM LOG
The ALARM LOG displays a list of alarm events.
l Select Log > System Log > Alarm Log.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 195 A6V10276959-d
11.2018

Vanderbilt SPCA210.100 Specifications

General

Brand	Vanderbilt
Model	SPCA210.100
Category	Power Supply
Language	English