Vanderbilt SPCA210.100 User Manual

Prerequisites
o
Mains power has failed
o
Battery power has failed
o
New batteries are available
1. Attach the battery leads.
2. Press and hold the PSU Kickstart button.
All LEDs flash.
3. Hold the PSU Kickstart button until the LEDs stop flashing.
4. Release the PSU Kickstart button.
PTC Fuse Reset
In the event of one of the PTC fuses resetting, you must manually disconnect then reconnect the mains
and battery connections.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Smart PSU
© Vanderbilt 2018 67 A6V10276959-d
11.2018

Vanderbilt SPCA210.100 Specifications

General

Brand	Vanderbilt
Model	SPCA210.100
Category	Power Supply
Language	English