Vanderbilt SPCA210.100 User Manual

Adding an EDP Receiver
1. Select Communications > Reporting > EDP.
The following page will be displayed:
Max. 8 receivers can be added to the SPC system.
2. Click the Add button.
The following page will be displayed.
3. See table below for further information.
Description Enter a text description of the receiver.
Receiver ID Enter a unique number which will be used by the EDP to identify the receiver.
See also
Editing EDP Receiver Settings on the next page
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 328 A6V10276959-d
11.2018

Vanderbilt SPCA210.100 Specifications

General

Brand	Vanderbilt
Model	SPCA210.100
Category	Power Supply
Language	English