Vanderbilt SPCA210.100 User Manual

ACCOUNT
NAME
Description of the Remote Alarm Receiving Centre.
PROTOCOL The communication protocol to be used (SIA, Contact ID, Fast Format).
1ST PHONE
NUMBER
The first number to be dialled to contact the ARC.
2ND
PHONE
NUMBER
The second number to be dialled to contact the ARC; the system only
attempts to contact the ARC on this number if the first contact number did
not successfully connect.
PRIORITY The modem (primary or back-up) to be used to communicate with the ARC.
4. After programming is complete, the option to make a test call to the station is displayed on the
keypad.
16.13.4.2 Edit
To edit the central station settings:
1. Scroll to CENTRAL STATION > EDIT.
2. Press SELECT.
3. Select the desired programming option shown in the table below.
ACCOUNT
ID
This information should be available from the receiving station and is used to
identify users each time a call is made to the ARC.
ACCOUNT
NAME
Description of the Remote Alarm Receiving Centre.
PROTOCOL The communication protocol to be used (SIA, Contact ID, Fast Format).
1ST PHONE
NUMBER
The first number to be dialled to contact the ARC.
2ND PHONE
NUMBER
The second number to be dialled to contact the ARC; the system only
attempts to contact the ARC on this number if the first contact number did not
successfully connect.
DIAL
ATTEMPTS
Enter the number of times that the system will attempt to make a call to the
receiver.
DIAL
INTERVAL
Enter the number of seconds to delay between failed dial attempts. (0–999)
ASSIGN
AREA
Assign the areas for which events are reported to the ARC.
REPORTED
EVENTS
Define the types of events reported to the ARC.
PRIORITY The modem (primary or back-up) to be used to communicate with the ARC.
AUTOMATIC
TEST
Defines a schedule for testing the connection to the ARC. Possible values
range from every hour to once every 30 days.
4. After programming is complete, the option to make a test call to the station is displayed on the
keypad.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the keypad
© Vanderbilt 2018 161 A6V10276959-d
11.2018

Vanderbilt SPCA210.100 Specifications

General

Brand	Vanderbilt
Model	SPCA210.100
Category	Power Supply
Language	English