4. Enter the following:
- User ID: user or engineer name
- Password: User or Engineer PIN.
5. Select a language in which to display the browser pages. The default language setting ‘Auto’ will
automatically load the language assigned to this user ID.
6. Click Login.
Default settings for WEB server address
Connection IP address Web server
Ethernet 192.168.1.100 (default)
RS232 192.168.2.1 (fixed)
Backup Modem/RS232 192.168.3.1 (fixed)
Primary Modem 192.168.4.1 (fixed)
USB 192.168.5.1 (fixed)
17.5 SPC Home
The SPC Home page has a System Summary tab, Alarms tab and Video tab.
17.5.1 System Summary
The System Summary tab is divided into the following three sections:
l System: shows the status of all areas, active system alerts and warnings and information for the
system.
l Areas: shows the status of each area defined on the system with up to 20 alarm events. You can
set or unset an area and the area status displays here.
l Inhibits and Isolates: Lists all the isolated zones and allows you to deisolate or bypass before
setting.
NOTICE: If there are alarms on the system, the information message See alarm tab displays.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 177 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
