The Confirm Language Upgrade page is displayed showing any languages that are being
installed.
5. Click the Confirm button.
A message is displayed to indicate if the language upgrade was successful or if it failed.
Deleting Languages
To delete languages from the language file:
1. Select the language file to upgrade by clicking the Browse button for the Language File Upgrade
option, selecting the required language file and then clicking on the appropriate Upgrade button.
A list of available languages in this file is displayed.
2. Uncheck the boxes for each of the languages that you want to delete.
3. Click the Upgrade Selected button.
The Confirm Language Upgrade page is displayed. When deleting a language, the panel deletes
all languages and reinstalls only the languages required.
4. Click the Confirm button to confirm the languages being deleted.
See Language on page269 for details of selecting the panel ‘System’ and ‘Idle State’ languages in the
browser.
See Options on page113 for details of selecting the panel ‘System’ and ‘Idle State’ languages on the
keypad.
See also
Language on page269
17.12.2 File Manager Operations
l Select File > File Manager.
A page displays showing details of the system configuration, language and trace files.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 341 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
