Timer Description Default
Engineer
Engineer
Access
ENGINEER
ACCESS
The timer for the Engineer access starts as soon as the user enables the Engineer
Access. (0–999 minutes; 0 indicates no time limitation for system access)
0min.
Engineer auto
log out
ENG AUTO
LOG OUT
Duration of inactivity after which the engineer will be automatically logged out. (0–300
minutes)
0min.
Keypad
Keypad Timeout
KEYPAD
TIMEOUT
The number of seconds that an RKD will wait for key entry before it leaves the current
menu. (10–300 seconds)
30sec.
Keypad
Language
KEYPAD
LANGUAGE
The duration a keypad will wait in idle before switching language to default. (0–9999
seconds; 0=never)
10sec.
Fire
Fire Pre-alarm
FIRE PRE-
ALARM
Number of seconds to wait before reporting fire alarm for zones with ‘Fire pre-alarm’
attribute set. See Editing a zone on page270. (1–999 seconds)
30sec.
Fire recognition
FIRE
RECOGNITION
Extra time to wait before reporting file alarm for zones with ‘Fire pre-alarm’ and ‘Fire
Recognition’ attributes set. See Editing a zone on page270. (1–999 seconds)
120sec.
PIN
PIN Valid
PIN VALID
Period for which pin is valid. (1–330 days) 30 days
PIN Changes
Limit
PIN CHANGES
LIMIT
Number of changes within a valid period. (1–50) 5
PIN Warning
PIN WARN
Time before PIN expiry after which a warning will be displayed. (1–14 days) 5 days
General Settings
RF Output Time
RF OUTPUT
The time that the RF output will remain active on the system. (0–999 seconds) 0sec.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the keypad
© Vanderbilt 2018 120 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
