Vanderbilt SPCA210.100 User Manual

Non-active
ATP
Connection
Select the ATP connection type when the ATP is operating as a backup
communication path.
l Permanent: Stay Connected
l Temporary: Hangup 1second
l Temporary: Hangup 20 seconds
l Temporary: Hangup 80 seconds
l Temporary: Hangup 3 minutes
l Temporary: Hangup 10 minutes
l Temporary: Hangup 30 minutes
Test Calls
Test Call
Mode (Non
Active ATP)
Select the mode for sending test calls when the ATP is the non-active ATP.
l Test calls Disabled
l Test call every 10 minutes
l Test call every 1 hour
l Test call every 4 hours
l Test call every 24 hours
l Test call every 48 hours
l Test call every 7 days
l Test call every 30 days
Test Call
Mode (Active
ATP)
Select the mode for sending test calls when the ATP is the active ATP.
l Test calls Disabled
l Test call every 10 minutes
l Test call every 1 hour
l Test call every 4 hours
l Test call every 24 hours
l Test call every 48 hours
l Test call every 7 days
l Test call every 30 days
Encryption (256-bit AES with CBC)
Encryption
Key Mode
Select how the encryption gets updated.
l Auto Encryption
l Auto Encryption with Updates
l Fixed Encryption
Note: Auto Encryption uses the default key and updates it once. Auto
Encryption with Updates changes the encryption key every 50,000 messages
or once per week, whichever comes first.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 312 A6V10276959-d
11.2018

Vanderbilt SPCA210.100 Specifications

General

Brand	Vanderbilt
Model	SPCA210.100
Category	Power Supply
Language	English