Name: Vanderbilt SPCA210.100
Brand: Vanderbilt
Rating: 5 (1 reviews)

To Next Page

To Previous Page

2. Fit the housing back onto the wall using the three fixings previously removed (see item 2 below).

Visually check to ensure there is a flush finish between the wall plate and the housing

metalwork.

Number Description

1 Housing

2 Wall

3 Wall Fixing Plate

4 Tamper Switch

WARNING: If the wall fixing plate is not accurately aligned then the housing will not sit properly on

its fixings.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Mounting system equipment

11.2018

Questions and Answers:

Need help?

Do you have a question about the Vanderbilt SPCA210.100 and is the answer not in the manual?

Vanderbilt SPCA210.100 Specifications

General