C
HAPTER
2. I
NSTALLATION
& C
HECKOUT
2-5
02.9628.0010 CONFIDENTIAL
7-Oct-97
2.1.2 Luminaire Packing
In order to ensure that luminaires are not damaged during shipment, it is
important to properly pack in the case.
When packing
VL4
luminaires into road cases, it is important to load them
so that the air screens are in the case lengthwise. This orientation prevents
the screens from being pulled loose when the luminaires are unpacked.
This also prevents bending the chassis top cover.
In order to ensure that luminaires are not damaged during shipment, it is
important to properly pack in the case.
CAUTION
: Ensure yoke is not resting against pan stop when packing.
To pack
VL4
luminaire:
Step 1. At console, run pack-up cue to place luminaire in proper
orientation for transport. (Pan should be 180
°
from stops and
tilt halfway between stops.)
Step 2. Disconnect luminaire input cable from system and remove
luminaire from truss.
Step 3. Place luminaire in road case as shown.
Step 4. Close and latch road case lid, ensuring all latches are properly
secured.
AIR FILTER SCREENS
HANDLE
SERIAL NUMBER TAG
To Next Page
Loading...