VARILITE VL4 - Voltage Selector PCB Fuses Removal and Replacement

C
HAPTER
3. M
AINTENANCE
P
ROCEDURES
3-83
02.9628.0010 CONFIDENTIAL
7-Oct-97
3.3.5.3 Voltage Selector PCB Fuses Removal and
Replacement
Parts
:
1 EA FUSE, 10AMP, 250V (70.3723.0001)
1 EA FUSE, 3A, 250V, 5X20MM, GLASS (70.3723.0003)
Tools
:
Screwdriver, Phillips #1
Screwdriver, Phillips #2
To remove and replace voltage selector PCB fuses:
Step 1. Remove power to luminaire.
Step 2. Remove voltage selector PCB (
Figure 3-29
).
Step 3. Remove blown 3A or 10A fuses (
Figure 3-30
).
Step 4. Replace fuses and re-install voltage selector PCB by doing
Steps 2 and 3 in reverse.