VAT 615 Series

Installation, Operating & Maintenance Instructions
Series 615 DN 40 (I.D. 1½”), DeviceNet
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
603476EA
2013-07-25
84/102
Description
Required tool
5. Unfasten and remove the 3 fastening
screws
Allen Wrench
3mm
6. Remove control and actuating unit from
mechanical valve unit
Pay attention: If clamp coupling is
separated, assemble them at control and
actuating unit.
Remove plate
7. Unfasten and remove the 2 fastening
screws
Allen Wrench
3mm