Ethernet © VeEX Inc. All Rights Reserved. 56
More about Advanced V-TEST Modes
Server Selection Modes
l
Ookla® Speedtest®
Speed Test Modes
Auto Mode: This is the default and recommended mode, and it is also
known as "Speedtest Powered" mode. It automatically selects the best
speedtest.net server from lists maintained by Ookla. It will scan nearby serv-
ers in the local market and test to the server with the fastest (lowest latency)
response.
Manual Mode: Manually select a specific Server ID from a list of public
Ookla servers. A list of all nearby servers is displayed automatically. The
corresponding server ID and server information (URL/IP, location, and ISP)
are also provided.
l
VeEX Managed – Perform internet speed tests by manually selecting servers from lists cre-
ated and maintained by VeEX. These non-public lists are created for specific customers.
The Update button is used to update the servers' list. Internet access is required to receive
the server lists maintained by VeEX.
l
User Managed – Advanced users can perform internet speed tests by manually selecting
servers from pre-configured lists, using the Manual mode. In User Managed mode, enter
the server IP/URL and save it to a server list that can be maintained and managed on its
own. Options to modify or delete server lists are available under Server List Manage.
l
Manual – Advanced users, with detailed knowledge of their Speedtest servers, can manu-
ally add their own servers, test files and maintain their own server lists. Enter the IP/URL of
the server to test. If TCP port number 8080 is used, there is no need to enter a Path and
File name. Port 8080 is used by Ookla netgauge servers, therefore the proper Speedtest
handshaking will take place between the test set (client) and Ookla server. If TCP port num-
ber 80 is used, the correct Path and Filename need to be entered.
Tap to switch to the Basic V-TEST view.
To Next Page
Loading...
