Verathon BladderScan BVI 3000 Service Manual

64
9. Remove the protective backing from the console label, and then carefully apply the console label to the
bottom of the console base housing, ensuring that the orientation is correct, as shown in the following
figure.
10. If you replaced the EPROM or PCB assembly, continue to Program the Console on page65.
If you did not replace the EPROM or PCB assembly, continue to the chapter Annual Certification on
page6.

Verathon BladderScan BVI 3000 Specifications

General

Brand	Verathon
Model	BladderScan BVI 3000
Category	Medical Equipment
Language	English