Vetus EC3 - Advices about the Mounting and Preservation of the Command Station; 4.9. Command Station Codes

030624.13 17
vetus® Electronic engine remote control
4.7 Advices about the mounting and preservation of the Command Station
In case of outdoor installation, being the command station not designed to be submerged by water, to be exposed di-
rectly to water jets, or to be cleaned with pressurized water/steam, please notice:
• Command station cannot be installed in areas where water can be retained or where there is the potential risk of cre-
ating water puddles.
• Command station cannot be submerged or directly exposed to waves or water jets.
• Command stations are made of materials resistant to marine environment; in any case, it is essential to remove period-
ically salt deposits on the external surfaces to avoid corrosion and consequentially system inefficiency.
• It is not allowed to clean the command station
with hydro-cleaner or any watering directly to
the command station.
• Do not use aggressive chemicals for cleaning
the command station.
• When not in use, put on the command station
the protection cover. In case the cover is not
included into the supply, it is possible to order
it separately.
4.8 Command station codes
Command stations
Description Code
Command station 1 motor EC3 EC3H1
Command station 1 motor EC3 with TRIM option EC3HT1
Command station 2 motors EC3 EC3H2
Command station 2 motors EC3 with TRIM option EC3HT2
Command station 1 motor EC4 EC4H1
Command station 1 motor EC4 with TRIM option EC4HT1
Command station 2 motors EC4 EC4H2
Command station 2 motors EC4 with TRIM option EC4HT2
Flexball Italiana S.r.l. 21
4.8. Advices about the mounting and preservation of the Command
Station
In case of outdoor installation, being the command station not designed to be submerged by water, to be
exposed directly to water jets, or to be cleaned with pressurized water/steam, please notice:
 Command station cannot be installed in areas where water can be retained or where there is the
potential risk of creating water puddles.
 Command station cannot be submerged or directly exposed to waves or water jets.
 Command stations are made of materials resistant to marine environment; in any case, it is essential to
remove periodically salt deposits on the external surfaces to avoid corrosion and consequentially system
inefficiency.
 It is not allowed to clean the command station with hydro-cleaner or any watering directly to the
command station.
 Do not use aggressive
chemicals for cleaning the
command station.
 When not in use, put on the
command station the
protection cover, as
described in section 4.1.3 of
the present manual. In case
the cover is not included into
the supply, it is possible to
order it separately.
4.9. Command station codes
Command stations
Description Code
Command station 1 engine series 3500
3500
.
C
-
1
0
0
0
0
5
Command station 1 engine series 3500 with TRIM option
3500
.
C
-
1
1
0
0
0
5
Command station 2 engines series 3500
3500
.
C
-
2
0
0
0
0
5
Command station 2 engines series 3500 with TRIM option
3500
.
C
-
2
2
0
0
0
5
Command station 1 engine series 4500
4500
.
C
-
1
0
0
0
0
5
Command station 1 engine series 4500 with TRIM option
4500
.
C
-
1
1
0
0
0
5
Command station 2 engines series 4500
4500
.
C
-
2
0
0
0
0
5
Command station 2 engines series 4500 with TRIM option
4500
.
C
-
2
2
0
0
0
5