Vislink Quantum User Manual

Quantum Receiver User Manual
Web GUI Screens
Issue No: A Page: 47
Ref: ?-Insert_Document_Part_No._Here-? Copyright © 2021 Vislink is a Vislink Technologies Inc. companies
Figure 6-32 Settings>Decoder>Service
The Service tab specifies the service decoding settings. The settings will not be
actioned until the Save button has been clicked:
Decoder Service Settings
 Service Select – enables selection of the service from those available in the
incoming multiplex by program number or PID.
 Program Number – enables selection of the service/program by typing or by
hovering over the field and clicking the increment/decrement buttons.
 Video PID – identifies the location of the selected service in the video PID.
 PCR PID – identifies the location of the selected service in the Program Clock
Reference (PCR) PID.
 PMT PID – identifies the location of the selected service in the Program Map
Table (PMT) PID.
 Pair 1-8 PID – identifies the audio pairs.

Vislink Quantum Specifications

General

Brand	Vislink
Model	Quantum
Category	Receiver
Language	English