Quantum Receiver User Manual
Web GUI Screens
Issue No: A Page: 51
Ref: ?-Insert_Document_Part_No._Here-? Copyright © 2021 Vislink is a Vislink Technologies Inc. companies
Changes may be saved by clicking on the
icon or deleted by clicking on the
icon.
6.3.3.2. RTSP
The Settings>Stream>RTSP tab specifies the settings for controlling media
transmission (RTSP).
RTCP monitors transmission statistics and provide quality of service (QoS)
feedback and aids synchronization of multiple streams. RTSP allows viewers to
remotely pause, play, and stop video streams via the Internet without the need
for local downloads.
NOTE: RTSP streams require that ‘/stream’ is added to the end of IP Address
(e.g. rtsp://127.0.0.1.554/stream).
Figure 6-36 Settings>Stream>RTSP
RTSP Settings
Enabled – enables/disables RTSP streaming.
Port – specifies the port to be used for streaming. Type or hover over the field
and click the increment/decrement buttons.
To Next Page
Loading...
