Quantum Receiver User Manual
Receiver Installation & Setup
Issue No: A Page: 74
Ref: ?-Insert_Document_Part_No._Here-? Copyright © 2021 Vislink is a Vislink Technologies Inc. companies
The BISS-1, BISS-E and AES+ decryption will only decode an encrypted stream;
EBS and AES will decode non encrypted (clear) streams and also the
appropriately encrypted streams.
7.12. Configuring & Saving a Preset
Use the web browser GUI (or front panel display) to configure the receiver as
required. When you have entered the correct configuration settings, save them
as a named preset, in order that you can recall/reinstate them quickly should
changes be made to the configuration.
Save your configuration using the Settings > Presets menu option:
1. Click on the Create New Preset button. A Create New Preset window will
be displayed to enable you to save your current settings.
2. Type in a descriptive name for your configuration.
3. Click the Save button to save the configuration as a preset. The name of
the preset should now appear in the list on the Settings > Presets screen
and also on the Status > Active Preset panel.
Up to 64 presets may be defined on your receiver. Presets can be imported
from other similar receivers or exported to other receivers as a cfg file to
enable you to quickly configure multiple receivers.
To Next Page
Loading...
Need help?
General
