Quantum Receiver User Manual
Web GUI Screens
Issue No: A Page: 53
Ref: ?-Insert_Document_Part_No._Here-? Copyright © 2021 Vislink is a Vislink Technologies Inc. companies
6.3.3.4. SRT
The Settings>Stream>SRT tab specifies the settings for streaming using the
Secure Reliable Transport (SRT) Protocol.
SRT protects against jitter, packet loss, and bandwidth fluctuation, ensuring the
best possible viewing experience. The SRT open source protocol utilizes ARQ
(Automatic Repeat Request) error correction to help prevent packet loss while
delivering the low latency performance of UDP. In addition, SRT can bring
together multiple video, audio, and data streams within a single SRT stream to
support highly complex workflows without burdening the network
administrators.
Figure 6-38 Settings>Stream>SRT
The SRT tab specifies the settings for SRT streaming. The settings will not be
actioned until the Save button has been clicked:
SRT Settings
Streaming – enables/disables SRT streaming.
Port – specifies the output streaming port. Type or hover over the field and click
the increment/decrement buttons.
Latency (ms) – specifies the latency in milliseconds between video and audio.
Pass Phrase – enables a pass phrase to be used/changed.
To Next Page
Loading...
