VYBO Electric Vector V800 - Page 61

Chapter 4: List of function parameters - shorted
55
P0.22
Frequency
reference
1: 0.1 Hz
2: 0.01 Hz
2
★
P0.23
Permanent digital
frequency setting on
power-on
0: No memory
1: Memory
0
☆
P0.24
Acceleration/Decele
ration time base
frequency
0: Maximum frequency (P0.12)
1: Set frequency
2: 100Hz
0
★
P0.25
Base frequency for
UP/DOWN
modification during
running
0: Running frequency
1: Set frequency
0
★
P0.26
Binding command
source to frequency
source
..X: Binding operation panel command
to frequency source
0: No binding
1: Frequency source by digital setting
2: FIV
3: FIC
4: Reserved
5: Pulse setting (S3)
6: Multi-reference
7: PLC
8: PID
9: Communication setting
.X.: Binding operation panel command
to frequency source (0-9, the same as
units)
X..: Binding operation panel command
to frequency source (0-9, the same as
units)
000
☆
P0.27
Communication
expansion card type
0: MODBUS communication card
0
☆
P0.28
Reserved