3-10 BA 1001/1501/2001 us – Edition 3.3 * * 12001b320.fm
Operation
Check lists
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Start-up checklist
Check the following points before putting the machine into operation or starting the engine:
No.
Question
✔
1
Enough fuel in the tank? (➠ 5-5)
2
Coolant level OK? (➠ 5-13)
3
Remove water in the diesel fuel prefilter (➠ 5-7)
4
Engine oil level OK? (➠ 5-10)
5
Oil level in hydraulic oil reservoir OK? (➠ 5-21)
7
V-belt condition and tension checked? (➠ 5-18)
8
Lubrication points greased?
9
Check hydraulic hoses, connections and cylinder seals for leaks
10
Firm position of battery terminals
11
Tires checked for cracks, cuts, etc. ? (➠ 5-26)
12
Footholds clean?
13
Engine cover locked with the buckle? (➠ 3-29)
14
Especially after cleaning, maintenance or repair work:
➥Rags, tools and other loose objects removed?
15
Seating position adjusted correctly? (➠ 3-27)
16
Rollbar raised and locked?
17
Seat belt fastened? (➠ 3-28)
To Next Page
Loading...
