3-26 BA 1001/1501/2001 us – Edition 3.3 * * 12001b330.fm
Operation
Loading the machine
Injury hazard when loading the machine!
Can cause severe injury or death.
• Leave the machine before the loading operation and only get onto it again after
finishing the loading operation.
Incorrect loading causes damage on the machine.
☞Ensure that the payload is not exceeded!
• Ensure that the operator’s visibility is not impaired.
• Before loading:
☞Select the neutral position with the travel lever
☞Lower the skip
☞Apply the parking brake
☞Stay clear of the control stand and the danger zone
• Once loading is over:
☞Remove dirt, debris, dust, etc. from the control elements
☞Remove loose material
To Next Page
Loading...
Need help?
General
