Wacker Neuson 2001

3-12 BA 1001/1501/2001 us – Edition 3.3 * * 12001b320.fm
Operation
3.7 Machine travel
Preheating start switch (overview)
Accelerator pedal (overview)
The accelerator pedal controls the engine speed as follows:
• Speed can be set continuously with accelerator pedal 25
☞Press down the accelerator pedal:
➥Engine speed rises
☞Reduce the pressure on the accelerator pedal:
➥Engine speed is reduced
1
0
2
3
Fig. 26: Preheating start switch
4
Position
Function Power consumer
0
Insert or remove the starting key None
1
ON/travel position
All functions are operational
➥Indicator lights illuminate
➥Rotating beacon illuminates
(option)
2
Preheats the engine (10 – 15 seconds)
➥Until the preheating indicator
light goes out
3
Starts the engine
➥Starter is actuated
➥Indicator lights must go out
Fig. 27: Accelerator pedal (symbolic representation)
25