Wacker Neuson 2001 User Manual

5-10 BA 1001/1501/2001 us – Edition 3.3 * * 12001b510.fm
Maintenance
5.4 Engine lubrication system
NOTICE
Engine damage and loss of output in case of insufficient engine oil level, or
wrong engine oil!
☞Have the oil changed by a Wacker Neuson service center
– see chapter 5.16 Maintenance plan 2001 (overview) on page 5-39
Important
In order to avoid engine damage, add the engine oil slowly so it can go down
without entering the intake system.
Checking the oil level
Important
Check the oil level once a day.
We recommend checking it before starting the engine. After stopping a warm
engine, wait at least 5 minutes before checking.
Checking the oil level
☞Proceed as follows:
• Park the machine on level ground
• Stop the engine!
• Let the engine cool down
• Open the engine cover
• Clean the area around the oil dipstick with a lint-free cloth
• Oil dipstick A:
☞Pull it out
☞Wipe it with a lint-free cloth
☞Push it back in as far as possible
☞Withdraw it and read off the oil level
☞However if necessary, add oil at the latest when the oil reaches the MIN mark on the oil
dipstick A
Fig. 81: Checking the oil level
A

Wacker Neuson 2001 Specifications

General

Brand	Wacker Neuson
Model	2001
Category	Utility Vehicle
Language	English