BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-23
Operation 5
Working lights
The machine is equipped with working lights in different versions to
ensure optimal light conditions of the work area:
• 1x rear working light (standard)
• 2x front and/or 2x rear working lights (opt)
The press switches for operating the working lights are located on the
right in the control lever console beside the operator seat.
Accident hazard due to blinded motorists!
During machine travel on public roads, the enabled work lights can blind
other motorists. This can cause serious injury or death.
► Always switch off the working lights during machine
travel on public roads.
► When operating the machine, only switch on the working lights when
no one can be blinded by them.
► Pay attention to national regulations on construction site lighting.
The press switches for the working lights are located on the front switch
panel to the right, next to the operator seat.
Working lights operation Function
ON
Press the toggle switch 67
(front) and/or toggle
switch 69 (rear) in position B.
➥ The indicator light in
the switch illuminates.
AUS
Press switch 67 (front)
and/or switch 69 (rear) to
position A.
➥ The indicator light in
the switch
extinguishes.
To Next Page
Loading...