5-54 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Fields of application of pallet forks
Important notice on pallet fork applications
Danger of accident due to installing lifting gear on the attachment
without proper authorization!
Can cause serious injury or death.
► The attachment is not certified for lifting gear applications.
► Hitching hooks, eyelets or other lifting gear onto the attachment is
prohibited as well.
The load diagram (windscreen or front trim left) is only valid for use with
the approved pallet forks. The correct tire types with the correct tire
pressures must be used:
• – see chapter 3 “Attachments for KRAMER quickhitch facility” on
page 3-18,
• – see chapter 3 “Attachments for SKID STEER quickhitch (currently
not available)” on page 3-21,
• – see chapter 3 “Attachments for EURO quickhitch” on page 3-23.
Pay attention to the specific load diagrams of other attachments used
– see "Fitting attachments from other manufacturers (opt)" on page 5-95!
Refer to the following pages for information on work operation with an
attachment – see "Work operation" on page 5-67.
To Next Page
Loading...