BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-71
Operation 5
Working with the bucket
Safety instructions regarding work with a bucket
Crushing hazard due to tipping over of machine!
Can cause serious injury or death.
► If the bucket is full, lower the loader unit to transport position and fully
tilt before starting machine travel.
► Do not exceed the permissible payloads. – pay attention to the load
diagram and act accordingly.
Danger of falling material when transporting loads with a raised
loader unit!
Can cause injury.
► Always tilt in the attachment slightly towards the machine and carry it
as close as possible to the ground; bear in mind the required ground
clearance!
► Raise a full bucket only at the tilt-out position, and only when the
machine is at a standstill.
► In case of bulky loads: