5-72 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Safety instructions regarding work with a bucket
Use only the released buckets with the certified material densities
– see chapter 3 “Use of attachments” on page 3-16.
If the material is supposed to be picked up, turn off the load stabilizer,
since the loader unit otherwise yields very easily, making it difficult to
perform any precise lifting movement.
– see "Load stabilizer for loader unit (opt)" on page 5-108.
Machine travel on public roads with a full bucket is prohibited in Germany!
Observe the legal regulations of your country.
Observe the following chronological order for emptying the bucket:
1. Raise the loader unit.
2. Tilt out the bucket.
Observe the following chronological order after emptying the bucket:
1. Tilt in the bucket.
2. Lower the loader unit.
To Next Page
Loading...