5-70 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Machine travel on public roads
Instructions for machine travel on public roads
When driving on public roads in Germany, equip the machine only with
attachments that are certified for this machine!
Attachments that are not certified for machine travel on public roads must
be removed and transported with a suitable means of transportation
– see chapter 3 “Attachments for KRAMER quickhitch facility” on
page 3-18,
Attachments for SKID STEER quickhitch (currently not available) on
page 3-21 or Attachments for EURO quickhitch on page 3-23.
In Germany, transporting material on public roads with a loaded
attachment is prohibited!
Observe the legal regulations of your country.
1. Prepare the machine for travel on public roads
– see chapter 4 “Preparations for driving on public roads” on
page 4-49.
Example: travel with certified bucket:
E
x
a
m
p
l
e
2. Empty and tilt back the bucket B.
3. Raise the loader unit until both red marks D on the lift frame and the
bulkhead are aligned.
➥ Ground clearance C about 250 mm (9.84 in).
4. Cover the blade or teeth of the bucket across their entire width with the
tooth guard A provided.
Loader unit operation
– see chapter 5 “Operating hydraulics” on page 5-30.
To Next Page
Loading...
Need help?
General
