Wacker Neuson KRAMER 5055e User Manual

5-76 BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5 Operation
Removing material/digging in hard soil
1. Place the bucket horizontally on the ground. To do this, push the
joystick forward C.
2. Set a slightly flatter digging angle than for digging in soft soil. To do
this, press the joystick to the left A.
3. Drive forward and push the bucket down slightly. To do this, push the
joystick forward slightly C.
Once the bucket has penetrated the soil:
4. Set the digging angle slightly flatter. To do this, push the joystick to the
left A so that the layer being removed is as even as possible and so
that the wheel spin is reduced.
5. Move the joystick to the left A and right B to loosen the material.
6. Proceed as for loading material hard to penetrate.
Grading
1. Lower the loader unit horizontally to the ground.
2. Reverse across the surface to be graded.
Fig. 158
2.
1
.
3
.
A
B
C
Fig. 159
4.
A
B
Fig. 160
2
.
1
.

Wacker Neuson KRAMER 5055e Specifications

General

Brand	Wacker Neuson
Model	KRAMER 5055e
Category	Front End Loaders
Language	English