Wacker Neuson KRAMER 5055e

BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-77
Operation 5
Loading heaped material (non-compacted material)
1. Align the blade parallel with the ground. To do this, move the joystick to
the left A or right B.
2. Place the bucket horizontally on the ground. To do this, push the
joystick forward C.
3. Travel forward.
After penetrating the heaped material:
4. Raise the loader unit evenly. To do this, pull the joystick backward D.
5. Tilt in the bucket. To do this, press the joystick to the left A.
6. Reverse out of the material.
7. Lower the loader unit to the transport position.
Loading heaped material (compacted material)
1. Proceed as for non-compacted material
2. Slightly tilt the bucket in and out when raising the loader unit in the
excavated material. To do this, move the joystick alternately to the
left A and right B
➥ The material is loosened
Fig. 161
3
.
4.
A
B
C
D
1
.
2
.
Fig. 162
5.
6
.
A
7
.
Fig. 163
2
.
2.
A
B