BA 357-00 * 3.0 * 35700_05_Bedienung.fm 5-81
Operation 5
When picking up and loading, two work movements can be executed
simultaneously if necessary, e.g. "Raise" and "Tilt" or "Lower" and
"Empty". To do this, the movements must be "blended" the on joystick.
Failure to observe the instructions specified above can cause serious
damage to the machine. The manufacturer does not give any warranty for
any such damage.
Check before starting work
Accident hazard due to unlocked attachment
The attachment can come off unexpectedly and cause
serious injury or death.
► Ensure that the attachment is visibly locked on either side with lock
pins E.
Observe the safety instructions before loading operations and act
accordingly!
► – see "Use of attachments" on page 3-16.
► – see "Attachment operation" on page 2-12.
Fig. 165
E
E
KRAMER
SKID STEER
E
EURO
To Next Page
Loading...