EasyManuals Logo

Wacker Neuson KRAMER 5055e User Manual

Wacker Neuson KRAMER 5055e
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #260 background imageLoading...
Page #260 background image
7-8 BA 357-00 * 3.0 * 35700_07_Wartung.fm
7 Maintenance
Work description
1
Service
center
User/operator Service center
Inspection work ( )
Delivery
inspection
Every 10 o/h
(once a day)
Every 20 o/h
Inspection "A"
Inspection "B"
Inspection "C"
Check the brake lining
2
of the service brake and
renew if necessary
●●
Check parking brake and renew parts if necessary
2
every 2 years
Tire check
(damage, inflation pressure, tread depth)
●●
Electrical system: check electric and ground connections,
chafing on wiring harnesses, battery terminals
●●
Check the battery, cable and battery connector for
damage and to determine it is securely seated
3
●●
Battery: check charging level; and
charge if necessary
●●
Clean and check the battery terminals
●●
Measure the insulation resistance
of the HV components
4
●●
Measure the insulation resistance of the battery
4
Measure potential equalization
4
●●
Measure battery off-load voltage
4
●●
Check the insulation monitor function
4
●●
Check drive shut-off
●●
1. Have maintenance and repairs only performed by an authorized service center (acknowledgement of warranty claims)
2. Safety part! Have maintenance and repairs performed only by an authorized service center
3. The operation/driver may not remove covers with high voltage markings for inspection
4. Have checked by an electrician in accordance with IEC 62485-3 and EN 1987-1.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson KRAMER 5055e and is the answer not in the manual?

Wacker Neuson KRAMER 5055e Specifications

General IconGeneral
BrandWacker Neuson
ModelKRAMER 5055e
CategoryFront End Loaders
LanguageEnglish

Related product manuals