Wacker Neuson KRAMER 5055e User Manual

BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-9
Maintenance 7
Work description
1
Service
center
User/operator Service center
Lubrication
2
()
(Note: lubricate more frequently
when in heavy-duty operation!)
Delivery
inspection
Every 10 o/h
(once a day)
Every 20 o/h
Inspection "A" Inspection "B" Inspection "C"
Hinges, joints (for example door arresters) ●● ● ●
Rear axle oscillating bearing ●
●● ● ●
Front and rear axle planetary drive bearings
(left and right)
●
●● ● ●
Loader unit – see "Lubricating the loader unit" on page 7-30
Lift chassis bearing ●
● ●●●
Tilt rod bearing ●
● ●●●
Rocker arm bearing ●
●● ● ●
Lift ram bearing ●
● ●●●
Tilt ram bearing ●
● ●●●
1. Have maintenance and repairs only performed by an authorized service center (acknowledgement of warranty claims)
2. Observe the manufacturer’s indications for the lubrication of attachments!
Work description
1
Service
center
User/operator Service center
Leakage check ( )
Delivery
inspection
Every 10 o/h
(once a day)
Every 20 o/h
Inspection "A" Inspection "B" Inspection "C"
Cooling system (hydraulic oil) (option) ● ● ●●●
Steering system
2
(hose pipes and steering cylinders) ● ● ●●●
Hydraulic system (hose pipes
3
and cylinders) ● ● ●●●
Braking system
2
(flexible lines and cylinders) ● ● ●●●
Air conditioning system (opt) – hose pipes,
condenser, dehumidifier
●
● ●●●
1. Have maintenance and repairs only performed by an authorized service center (acknowledgement of warranty claims)
2. Safety part! Have repair work performed only by an authorized service center
3. Replace hose pipes every 6 years (DIN 20066 T5)

Wacker Neuson KRAMER 5055e Specifications

General

Brand	Wacker Neuson
Model	KRAMER 5055e
Category	Front End Loaders
Language	English