EasyManua.ls Logo

Wacker Neuson KRAMER 5055e

Wacker Neuson KRAMER 5055e
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-18 BA 357-00 * 3.0 * 35700_08_Betriebsstörung.fm
8 Malfunctions
Hydraulic engine (continuation)
Error code FMI
Warning
light
Error description Remedy
518433
0 Yellow
N004 – Threshold exceeded by far
– Machine immediately goes into emergency
shutdown
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected by
an authorized service
center.
12 Yellow
N004: Control error (controller)
– Temperature on the heat sinks is faulty
– Machine can continue to be operated with loss
of output. The output loss is
temperature-dependent and occurs in three
stages.
If the temperature is not lowered:
– Machine immediately goes into emergency
shutdown
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
Critical error
Have the error rectified by an
authorized service center.
16 Yellow
N004 – Threshold exceeded
– Vehicle can still be operated in
emergency operation
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected by
an authorized service
center.
518434 0 Yellow
N004 – Threshold exceeded by far
– Machine immediately goes into emergency
shutdown
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected by
an authorized service
center.
518436 2 Yellow
N004 – Signal faulty or irregular
– Hydraulic motor immediately goes
into emergency shutdown
518435 12 Yellow
N004: Control error (controller)
– Interim voltage temporarily exceeded
Error
1. Select the “Turtle” speed
range
2. Reducing engine speed

Table of Contents

Related product manuals