EasyManua.ls Logo

Wacker Neuson KRAMER 5055e

Wacker Neuson KRAMER 5055e
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA 357-00 * 3.0 * 35700_08_Betriebsstörung.fm 8-19
Malfunctions 8
Travel drive
Error code FMI
Warning
light
Error description Remedy
517041
2
Red
B042 – Potentiometer (joystick):
Signal 1: Signal is faulty or irregular
– Machine travel function is blocked
Critical error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected by
an authorized service
center.
3 Yellow
B042 – Potentiometer (joystick):
Signal 1: Signal range exceeded or short circuit to
positive supply voltage
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected by
an authorized service
center.
4 Yellow
B042 – Potentiometer (joystick):
Signal 1: Signal range fallen below or short circuit
to vehicle ground / sensor ground
28 Yellow
B042 – Potentiometer (joystick):
Signal 1: Open control circuit or short circuit to
positive supply voltage.
517121
3 Yellow
B042 – Potentiometer (joystick):
Signal 2: Signal range exceeded or short circuit to
positive supply voltage
4 Yellow
B042 – Potentiometer (joystick):
Signal 2: Signal range fallen below or short circuit
to vehicle ground / sensor ground
28 Yellow
B042 – Potentiometer (joystick):
Signal 2: Open control circuit or short circuit to
positive supply voltage.
519015
3 Yellow
S066 – Switch neutral (joystick):
Signal range exceeded or short circuit to positive
supply voltage
– Neutral travel direction push button without
function
26 Yellow
S066 – Switch neutral (joystick):
Signal outside of the valid range
– Neutral travel direction push button without
function
27 Yellow
S066 – Switch neutral (joystick);
Open circuit or short circuit to ground
– Neutral travel direction push button without
function

Table of Contents

Related product manuals