8-20 BA 357-00 * 3.0 * 35700_08_Betriebsstörung.fm
8 Malfunctions
Speed ranges (switch speed ranges)
Accelerator pedal
Error code FMI
Warning
light
Error description Remedy
518970
3 Yellow
S021 – Signal range exceeded or short circuit to
positive supply voltage
– only speed range "turtle" possible
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected
by an authorized service
center.
26 Yellow
S021 – Signal outside of the valid range
– only speed range "turtle" possible
27 Yellow
S021 – Open circuit or short circuit to ground
– only speed range "turtle" possible
Error code FMI
Warning
light
Error description Remedy
519911
2
Red
R011 – Potentiometer:
Signal 1: Signal is faulty or irregular
– Machine able to travel in limp home mode
Critical error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected
by an authorized service
center.
3 Yellow
R011 – Potentiometer:
Signal 1: Signal range exceeded or short circuit to
positive supply voltage
Error
1. Turn off the machine and
then turn it on again.
2. If the error occurs again:
have the error corrected
by an authorized service
center.
4 Yellow
R011 – Potentiometer:
Signal 1: Signal range fallen below or short circuit
to vehicle ground / sensor ground
28 Yellow
R011 – Potentiometer:
Signal 1: Open control circuit or short circuit to
positive supply voltage.
519939
3 Yellow
R011 – Potentiometer:
Signal 2: Signal range exceeded or short circuit to
positive supply voltage
4 Yellow
R011 – Potentiometer:
Signal 2: Signal range fallen below or short circuit
to vehicle ground / sensor ground
28 Yellow
R011 – Potentiometer:
Signal 2: Open control circuit or short circuit to
positive supply voltage.
To Next Page
Loading...