Wacker Neuson KRAMER 5055e User Manual

BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm 4-9
Putting into operation 4
Folding the operator seat forwards
1. Pull handle A and push operator seat fully backwards.
2. Unscrew the 3 hexagon screws B on each side of the operator seat.
3. Fold the operator seat forwards and secure it against falling back.
Seat adjustment (overview)
The operator seat can be set to the following positions:
A Weight adjustment
B Backrest adjustment
C Horizontal seat adjustment
Weight adjustment
1. Sit down on the operator seat.
2. Adjust the weight.
Fig. 53
B
A
Fig. 54
A
B
C
Fig. 55
A
D
Weight Adjustment
Higher operator
weight
Press handle A downward until the weight of the
operators is reached in display D
(10 kg / 22 lb per notch)
Lower operator
weight
1. Press handle A downward as far as it will go.
➥ The weight adjustment automatically
returns to the upper 50 kg (110 lb) position.
2. Press handle A downward until reaching the
weight in indicator D.

Wacker Neuson KRAMER 5055e Specifications

General

Brand	Wacker Neuson
Model	KRAMER 5055e
Category	Front End Loaders
Language	English