BA 357-00 * 3.0 * 35700_04_Inbetriebnahme_01.fm 4-19
Putting into operation 4
Locking the-battery cover plate
Opening the battery cover plate
Risk of electric shock from defective components or contact with the
high-voltage system!
Causes serious injury or death.
► Before opening the battery cover plate, actuate the motor isolating
switch and remove the ignition key.
► The battery cover plate may only be opened by specially trained
personnel.
► Do not touch damaged high-voltage system components or cables
(orange-labeled).
1. Stop and park the vehicle.
2. Apply the parking brake.
3. Switch off motor isolating switch.
4. Turn the machine off and remove the ignition key.
5. Lock the lock with the ignition key A.
6. Press lock A.
➥ The battery cover plate is raised upwards over a gas pressure
absorber.
Closing the battery cover plate
Danger of electric shock from damaged cable!
Can cause serious injury or death.
► Before closing the battery cover plate, make certain that no cable can
be damaged.
► Do not touch damaged cables.
1. Firmly press down the battery cover plate, until the lock engages with
an audible click.
2. Lock the lock A.with the ignition key.
To Next Page
Loading...
Need help?
General
