W&T Com-Server++ - Page 107

107
W&T Mode TCP client
Subject to error and alteration
Example 3: A control program polls multiple measuring devi-
ces; the measuring devices can (e.g. in case of error) indepen-
dently send data to the control program
C
B
A
Intranet /
Internet
Configuration menu:
r TCP/IP Mode r TCP-Client
Com-Server A
- Server Port: 8000
- Server IP: IP address Com-Server B
- Client“C“+Addr.: deactive
Com-Server B, C, ...
- Server Port: 8000
- Server IP: IP address Com-Server A
- Client“C“+Addr.: deactive
The control program addresses the measuring devices through the serial port
in the following format: C[IP address],[port number]<CR>
Example: C172.10.230.10,8000<CR>