Wasp WLS9600 - Code 39 Start;Stop Character Transmission; Code 39 Full ASCII

Code 39 ENTER/EXIT PROGRAMMING MODE
108 WLS9600
Code 39 Start/Stop Character Transmission
Enable this option to enable/disable transmission of Code 39 start and stop characters
DEFAULT
Code 39 Start/Stop Character Transmission = Don’t Transmit
Code 39 Start/Stop Character Transmission = Transmit
.
Code 39 Full ASCII
Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters.
DEFAULT
Code 39 Full ASCII = Disable
Code 39 Full ASCII = Enable