Wasp WLS9600 - Code 4 and 5 Decoding Level; Code 4 and Code 5 Common Configuration Items

Code 4 and Code 5 Common Configuration Items ENTER/EXIT PROGRAMMING MODE
224 WLS9600
CODE 4 AND CODE 5 COMMON CONFIGURATION ITEMS
The following options apply to both Code 4 and Code 5 symbologies.
Code 4 and 5 Decoding Level
Decoding Levels are used to configure a barcode symbology decoder to be very aggressive to very
conservative depending on a particular customer’s needs. See page 231 for more information on
this feature.
Code 4 and Code 5 Decoding Level = 1 (conservative)
Code 4 and Code 5 Decoding Level = 2
Code 4 and Code 5 Decoding Level = 3
DEFAULT
Code 4 and Code 5 Decoding Level = 4
Code 4 and Code 5 Decoding Level = 5 (aggressive)
This configuration item applies to Code 4 and Code 5.