Wasp WLS9600 - Gs1-128 Aim ID

ENTER/EXIT PROGRAMMING MODE
54 WLS9600
GS1-128 AIM ID
If Global AIM ID is disabled, the AIM ID for GS1-128 can be enabled/disabled independently.
The AIM ID for GS1-128 is a ]C1, ]C2 or ]C3.
AIM IDs for other symbologies can be enabled/disabled independently as well
. Contact
Customer Support for assistance
GS1-128 AIM ID = Disable
GS1-128 AIM ID = Enable
DEFAULT