ENTER/EXIT PROGRAMMING MODE Bi-Directional Read Decoding
Product Reference Guide 229
Bi-Directional Read Decoding
This configuration provides control over the good read and barcode label requirement. This
programming option for Gyphon Laser affects all barcode symbologies.
Bi-Directional Read Disable.
When Bi-directional reading is disabled, the laser scan is only
required to obtain a valid label read in one scanning direction.
Bi-Directional Read Enable.
When enabled, the reader is must obtain a valid good read in both
scanning directions as part of the label read/decode process. Enabled will provides increased
decode reliability.
Bi-Directional Read Disable
Bi-Directional Read Enable
DEFAULT
To Next Page
Loading...
